Model | 300 | 400 | 500 | SZ-650 |
Max Drawing Rotation Speed | 3000 rpm | 3000 rpm | 3000 rpm | 2000 rpm |
Dual strand | It’s for 7 lines silvering cable ,tinning cable and pure copper cable |
Entry wire dia (mm) | Ф0.05-0.28 | Ф0.08-0.35 | Ф0.08-0.45 | Ф0.38-1.0 |
Cross-sectional area of intertwist (mm²) | 0.035-1mm² | 0.035-2mm² | 0.05-4mm² | 0.8-5.5mm² |
Standard Lay Length (mm) | 10 segment 3.65-17.15 | 40 segment 3.7-30.6 | 40 segment 6.3-50.4 | 34 segment 11.15-66 |
Twisting Direction | Left or right direction can be chosen |
Spool Diamension ID×OD×Wdt (mm) | Ф40×Ф300×180 | Ф70×Ф400×270 | Ф80×500×300 | Ф80×Ф650×360 |
Bare trunk traverser (mm) | Ф15 | Ф20 | Ф20 | Ф30 |
Spindle centre height (mm) | 630 | 685 | 700 | 850 |
Spindle lubricating type | Lubrication with thinoil and cooling by natura circulation |
Brake system | Electromagnetic brake B-bype machine inside brake is adjusted automatically by the magnetic powder dutch |
Protection | Braked autumatically by inside/outside break of wire, and automati stop in case of finishing counting meters. |
Safety Protection | The machine cannot run or brake if each door or elevating stage which can be open cannot work. |
Machine State | All states of machine and its malfunction can be detected by corresponding indicator light. |
Control | Allcontiolled by transdrcers,and The stranded of B-type machine can be adjusted by maqnetic powder clutch. |
Mcin Power | 4KW | 5.5 KW | 5.5 KW | 7.5 kw |